RobotStudio event

Visualize World Zones

Options
THOD
THOD ✭
in UpFeed
It would be great if we can setup world zones offline and then be able to sync them to the controller.  This would be a huge advantage!


Comments

  • Snampo
    Snampo ✭
    Options
    Thils would be very helpful, +1
  • Neily03
    Neily03 ✭✭✭
    Options
    +1
  • jules_verne82
    jules_verne82 ✭✭
    Options
    +1
  • DavidR
    DavidR ✭
    Options
    +1.
    One other thing, when using "WZDOSet" in a RobotStudio station it seems like the output is not beeing updated when the robot is entering/leaving the zone. 
    It's updated once during a warmstart but after warmstart is completed it's freezed. 
    /David
  • JérémyB
    JérémyB ✭
    Options
    +1
  • DavidR
    DavidR ✭
    Options
    A workaround I use when I create a wz box is to set wobj0 to UCS and click in the graphics (sometimes I create a box) where you want your corners. The UCS coordinates are shown in bottom right corner of RobotStudio.

Categories

In this Discussion