PP to main in a Trap routine.
Options
Afternoon,
I was wondering if someone could give me a little bit of insight into how a PP to main would work if a robot was in a trap routine.
If the robot was in a trap routine waiting for a digital input, and someone was to force a pp to main and start the robots; would this restart the robot currently executing a trap or would it be unaffected by this?
Thanks in advance for your help!
I was wondering if someone could give me a little bit of insight into how a PP to main would work if a robot was in a trap routine.
If the robot was in a trap routine waiting for a digital input, and someone was to force a pp to main and start the robots; would this restart the robot currently executing a trap or would it be unaffected by this?
Thanks in advance for your help!
0
Comments
-
It would be as if the robot was not in the trap. The calling heirarchy will be reset.Lee Justice1
-
perfect, thanks again0
Categories
- All Categories
- 5.4K RobotStudio
- 385 UpFeed
- 15 Tutorials
- 12 RobotApps
- 291 PowerPacs
- 405 RobotStudio S4
- 1.8K Developer Tools
- 247 ScreenMaker
- 2.7K Robot Controller
- 285 IRC5
- 47 OmniCore
- 6 RCS (Realistic Controller Simulation)
- 3 RobotStudio AR Viewer
- 748 RAPID Programming
- 15 Wizard Easy Programming
- 110 Collaborative Robots
- 3 Job listings