Offline Controller doesn't restart

DenisFR

Hello,

I've got a real controller with:

>>PRODUCTS_ID:
RobotWare Version: 6.06.01.00
promia Version: 6.06.1802.31.ACI

  RobotWare Base
  888-2 PROFINET Controller/Device
  997-1 PROFIsafe F-Device
  988-1 RW Add-In Prepared
  604-1 MultiMove Coordinated
  608-1 World Zones
  611-1 Path Recovery
  613-1 Collision Detection
  614-1 FTP and NFS client
  616-1 PC Interface
  617-1 FlexPendant Interface
  623-1 Multitasking
  996-1 Safety Module
  1125-2 SafeMove Pro
  634-1 MultiProcess
  French
  Axis Calibration
  Pendelum Calibration
  Motor Commutation
  Service Info System
  IRB 1600-10/1.45
  Drive System IRB 120/140/260/360/910SC/1200/1400/1520/1600/1660ID
  Axis Calibration
  Pendelum Calibration
  Motor Commutation
  Service Info System
  IRB 1600-10/1.45
  Drive System IRB 120/140/260/360/910SC/1200/1400/1520/1600/1660ID
  Client ACI
  Robot1
  R1_Manutention
  Robot2
  R2_Manutention
  Package Detaille
  Option Ordre-Event Etendus
  6 Profinet C/D Internal Device
  4 Profinet Device
  Physiques

When I do an offline copy of it, RS 6.08 make a controller but this one never restart.

Restarting all computer, I can restart new virtual controller but some device (simulated and PROFINET_DEVICE) are removed and some module not loaded (with -AllMotionTask flag).

When I restart it (Warmstart), it doesn't start. I have to restart all computer each time.

I test to reset it to default (I-Start), then It doesn't directly restart too.

Testing this method with Virtual Controller Logging file and console, I've got this message in console:

pf_execute: Starting the shutdown sequence...<br><div>(pfExec): SYS HALT from baseroot.c,3799<br>Power-fail handling did not complete within specified time!</div><div></div>

But nothing new in console.log file.

Does someone get these errors and get a fix?