Remote I/O - AllenBradley 1794 ADN
Ivonne
✭
Hello everyone, I'm confuse and hope someone can help me.
I'm trying to connect a DSQC 350 to an AllenBradley 1794 AND.
Do I have to connect X8 and X9 (Line1, Line2, Shield, Cabinet Ground) to PLC module?
Main connection of AllenBradley 1794 must to be connected with DN master???
I'm trying to connect a DSQC 350 to an AllenBradley 1794 AND.
Do I have to connect X8 and X9 (Line1, Line2, Shield, Cabinet Ground) to PLC module?
Main connection of AllenBradley 1794 must to be connected with DN master???
0
Best Answers
-
We have used the 1747-SN remote I/O scanner with the DSQC 350. The 1794-ADN is a Flex I/O DeviceNet module. I could be mistaken, but it seems to be a different protocol.5
-
There is the need to connect X8 and X9 (Line1, Line2, Shield, Cabinet Ground) to PLC module.
You must try by using the 1747-SN remote I/O scanner with the DSQC 350.
It is a 1794-ADN is a Flex I/O DeviceNet module.
But it has the different protocol.
5
Answers
-
Actually I connected the 1794 adn, dsqc 651 and dsqc 350 in a node with DN 603. I haven't used the Remote I/O yet cause I don't have a PLC.0
Categories
- All Categories
- 5.6K RobotStudio
- 398 UpFeed
- 20 Tutorials
- 14 RobotApps
- 300 PowerPacs
- 406 RobotStudio S4
- 1.8K Developer Tools
- 250 ScreenMaker
- 2.8K Robot Controller
- 336 IRC5
- 67 OmniCore
- 8 RCS (Realistic Controller Simulation)
- 828 RAPID Programming
- 12 AppStudio
- 4 RobotStudio AR Viewer
- 19 Wizard Easy Programming
- 107 Collaborative Robots
- 5 Job listings