Forum Migration Notice
Update (2026-01-21): The user forums are now in read-only mode pending the data migration.
Update (2026-01-12): The user forums will be put into read-only mode on the 21st of January, 00:00 CET, to prepare for the data migration.
We're transitioning to a more modern community platform by beginning of next year. Learn about the upcoming changes and what to expect.
Update (2026-01-12): The user forums will be put into read-only mode on the 21st of January, 00:00 CET, to prepare for the data migration.
We're transitioning to a more modern community platform by beginning of next year. Learn about the upcoming changes and what to expect.
Omnicore virtual flexpendant
Hi, do someone know, how to jog the robot via omnicore virtual flexpendant? There is no joystick, and I can not find any instruction for usage.
Tagged:
0
Comments
-
As you point out there is no joystick on the Omnicore virtual FlexPendant - you will have to use the RobotStudio tools in the home tab for moving (jogging) the robot.
0 -
The flexpendant is not really "virtual" as it is the same app that runs on the real pendant
So there is no simulation of the jogging hardware, at least not currently.
But there is an add-in in RobotApps that you can test:
https://robotapps.robotstudio.com/#/viewApp/0827f98d-e511-4aed-91bc-701836212b2f
Johannes Weiman
Software Engineer
RobotStudio Team, ABB Robotics0
Categories
- All Categories
- 5.7K RobotStudio
- 402 UpFeed
- 21 Tutorials
- 16 RobotApps
- 307 PowerPacs
- 407 RobotStudio S4
- 1.8K Developer Tools
- 251 ScreenMaker
- 2.9K Robot Controller
- 368 IRC5
- 92 OmniCore
- 8 RCS (Realistic Controller Simulation)
- 859 RAPID Programming
- 43 AppStudio
- 4 RobotStudio AR Viewer
- 19 Wizard Easy Programming
- 111 Collaborative Robots
- 5 Job listings