Forum Migration Notice
Update (2026-01-12): The user forums will be put into read-only mode on the 21st of January, 00:00 CET, to prepare for the data migration.
We're transitioning to a more modern community platform by beginning of next year. Learn about the upcoming changes and what to expect.
We're transitioning to a more modern community platform by beginning of next year. Learn about the upcoming changes and what to expect.
Conveyor tracking--One robot tracks two conveyors
jerry-licao
✭✭
Hello EveryBody:
Can one robot track two conveyors at the same time? And do we need add another Encoder interface? I looked up the manual and found that the AE is Not USED.
Can it be used for another encoder on the conveyor? Has anyone ever been in a situation like this? Thanks,
Can one robot track two conveyors at the same time? And do we need add another Encoder interface? I looked up the manual and found that the AE is Not USED.
Can it be used for another encoder on the conveyor? Has anyone ever been in a situation like this? Thanks,
0
Comments
-
It is common to track a pick and place conveyor, you need a separate queue tracking board (DSQC377) for each conveyor.
0 -
graemepaulin Thanks very much....0
Categories
- All Categories
- 5.7K RobotStudio
- 402 UpFeed
- 21 Tutorials
- 16 RobotApps
- 307 PowerPacs
- 407 RobotStudio S4
- 1.8K Developer Tools
- 251 ScreenMaker
- 2.9K Robot Controller
- 368 IRC5
- 92 OmniCore
- 8 RCS (Realistic Controller Simulation)
- 859 RAPID Programming
- 43 AppStudio
- 4 RobotStudio AR Viewer
- 19 Wizard Easy Programming
- 111 Collaborative Robots
- 5 Job listings