Windows 10 and device discovery
e_tip
✭
in RobotStudio
Hi everyone.
I have 5 controllers in my network. When i go into Add Controller, I can see in the Recent controllers list, all my 5 controllers but all of those have status: Not Found.
By the way if i do Add Controller, and digit controller ip address into the remote controller field, i can connect to that Controller successfully.
I initially thought about a firewall issue, so i've disabled it, but this didn't solve the issue. The strange thing here is that my collague have windows 7 and controller discovery works like a charm.
Does anyone had an issue like this and knows how to solve ?
I have 5 controllers in my network. When i go into Add Controller, I can see in the Recent controllers list, all my 5 controllers but all of those have status: Not Found.
By the way if i do Add Controller, and digit controller ip address into the remote controller field, i can connect to that Controller successfully.
I initially thought about a firewall issue, so i've disabled it, but this didn't solve the issue. The strange thing here is that my collague have windows 7 and controller discovery works like a charm.
Does anyone had an issue like this and knows how to solve ?
0
Categories
- All Categories
- 5.5K RobotStudio
- 395 UpFeed
- 18 Tutorials
- 13 RobotApps
- 297 PowerPacs
- 405 RobotStudio S4
- 1.8K Developer Tools
- 249 ScreenMaker
- 2.7K Robot Controller
- 310 IRC5
- 59 OmniCore
- 7 RCS (Realistic Controller Simulation)
- 785 RAPID Programming
- AppStudio
- 3 RobotStudio AR Viewer
- 18 Wizard Easy Programming
- 105 Collaborative Robots
- 4 Job listings