Group IO incorrect value

SelenErsoy
Netherlands ✭
in IRC5
Dear friends,
I finally connected my ABB to Siemens 1512SP f1 serie. I mapped my IOs. Digital inputs and outputs are working fine but I receive incorrect value in PLC.
Please see my picture down below.
I tried to swap my bytes: Normally it is 96-111 I tried also 111-96.
Can someone help me to understand where do I do wrong?


I finally connected my ABB to Siemens 1512SP f1 serie. I mapped my IOs. Digital inputs and outputs are working fine but I receive incorrect value in PLC.
Please see my picture down below.
I tried to swap my bytes: Normally it is 96-111 I tried also 111-96.
Can someone help me to understand where do I do wrong?

Tagged:
0
Comments
-
You are probably one bit off in the mapping, what does the PLC see if you set it to a value of 1?Lee Justice0
Categories
- 10.3K All Categories
- 5.2K RobotStudio
- 341 UpFeed
- 13 Tutorials
- 6 RobotApps
- 281 PowerPacs
- 404 RobotStudio S4
- 1.7K Developer Tools
- 236 ScreenMaker
- 2.6K Robot Controller
- 238 IRC5
- 34 OmniCore
- 6 RCS (Realistic Controller Simulation)
- 3 RobotStudio AR Viewer
- 678 RAPID Programming
- 14 Wizard Easy Programming
- 100 Collaborative Robots
- 3 Job listings