machinig power pack problem with path
Hi all,
Does anyone have an idea of what the problem is in my case?
When I add geometry to a part on my part everything seems ok to me but when I create an operation my path is not in the exact position of the geometry but always as if some offset appears.
Here is picture from my problem.
First image shows the desired geometry
Second image show path and I don't know why that path escapes me like that
Does anyone have an idea of what the problem is in my case?
When I add geometry to a part on my part everything seems ok to me but when I create an operation my path is not in the exact position of the geometry but always as if some offset appears.
Here is picture from my problem.
First image shows the desired geometry
Second image show path and I don't know why that path escapes me like that
0
Categories
- All Categories
- 5.5K RobotStudio
- 396 UpFeed
- 18 Tutorials
- 13 RobotApps
- 297 PowerPacs
- 405 RobotStudio S4
- 1.8K Developer Tools
- 250 ScreenMaker
- 2.8K Robot Controller
- 316 IRC5
- 60 OmniCore
- 7 RCS (Realistic Controller Simulation)
- 797 RAPID Programming
- AppStudio
- 3 RobotStudio AR Viewer
- 18 Wizard Easy Programming
- 105 Collaborative Robots
- 5 Job listings