RobotStudio event

s4/s4c install system via serial port ?

Options
irobot
irobot ✭
in Robot Controller
if possible , how to?

normally, s4/s4c(M94/M96/M97)  install system via floppy drive, but slowly and floppy disk broken  after  several times .

thanks!
http://www.davidrobot.com/

Comments

  • Stefan Westberg
    Stefan Westberg ✭
    Options
    Hi!

    It is not possible to load systems via serial port.
    However, for S4C there is an option for an extra ethernet card with which it is possible to install systems.

    Best Regards
    Stefan Westberg

  • junjun
    junjun
    Options

    Hi

    i wonder is there any other method to install the OS without floppy

Categories

In this Discussion