RobotStudio event

S4C+ Controller USB Port

irobot
irobot ✭
in Robot Controller




I tried usb floppy and usb flashdisk(U disk) plug into the S4C+ controller USB Port , but seems that the controller cannt find these usb devices.  the File Manager list is only  flp1 and hd0a.

anyone have experience of using the S4C+ usb port ?


RobotWare 4.0  3HAC 8531-2.18
S4C+  M2000  Controller
irobot2008-11-28 17:01:58
http://www.davidrobot.com/

Comments

  • Rookie
    Rookie ✭✭
    Hi,
     

    I know that some USB sticks are not running on the controller. Just try ( again ) a different one. I do not have any experience on the USB on s4C, i have only seen USB on irc5.
  • TylerRobertson
    TylerRobertson ✭
    This is old but I thought I would reply as we have a similar setup - the USB port is probably wired in to take over the floppy. You need to format the USB drives to be the size of a floppy disk!

Categories

In this Discussion