How to set Digital I/O´s by Station Signals
Options
in RobotStudio
Hey,
I want to set a DI by a station signal. How can I do this.
My application:
============
IA've got a Multi move System
Robot 1 sets a DO and moves a Kinematic to a position. (Event)
When the position is reached the kinematic sets a Station signal. (Event)
Now I want to start the movement of the Robot 2 (WaitDI)
IA've created an event that Sets a DI to 1 by the Station Signal
IA've changed the accesslevel of the DI to "all"
BUT
The DI donA't changes the value.
What IA've forgotten? What else I have to do ?
Wilfried
I want to set a DI by a station signal. How can I do this.
My application:
============
IA've got a Multi move System
Robot 1 sets a DO and moves a Kinematic to a position. (Event)
When the position is reached the kinematic sets a Station signal. (Event)
Now I want to start the movement of the Robot 2 (WaitDI)
IA've created an event that Sets a DI to 1 by the Station Signal
IA've changed the accesslevel of the DI to "all"
BUT
The DI donA't changes the value.
What IA've forgotten? What else I have to do ?
Wilfried
0
Comments
-
IA've found out something:
The DI will set by starting the simulation in manual mode or in manual 100% mode.
In auto it seems, that RS donA't have write access inside the VC.
Any Ideas?
0
Categories
- All Categories
- 5.4K RobotStudio
- 384 UpFeed
- 14 Tutorials
- 12 RobotApps
- 291 PowerPacs
- 405 RobotStudio S4
- 1.8K Developer Tools
- 247 ScreenMaker
- 2.7K Robot Controller
- 279 IRC5
- 46 OmniCore
- 6 RCS (Realistic Controller Simulation)
- 3 RobotStudio AR Viewer
- 736 RAPID Programming
- 15 Wizard Easy Programming
- 105 Collaborative Robots
- 3 Job listings