Pc interface not founded

yuanlei

Hi,everybody.

when i click restart (x-start)on the screen ,it  prompt "this is currently not allowed,please contact your system." i want to set controller's Ip address.

When i connect pc to the sevice port , i can scan the controller.But i can't log on the controller,it prompt "pc interface option not founded." What is the matter?  what is pc interface? Is it a software option? where could i find it ?Please help me.

Klaus

PC interface is a software option. you must contact your local ABB and buy the option. then create a new system with the new key

 

BR klaus

yuanlei

Thanks for your reply.I get it.

yuanlei

How can i know if there has had a pc interface option in my controller?

Klaus

Make a backup of the controller. In the backup there is a system.xml. All options of the systems is in that file

 

yuanlei

Thank you once again for your answer.Now i has a system.xml.

As follows:

 <?xml version="1.0" encoding="UTF-8" ?>

- <SystemProperties>

  <SystemName>14-63056A</SystemName>

  <SerialNo>14-63056</SerialNo>

- <UsedMedia>

  <Media path="C:PROGRAM FILESABB INDUSTRIAL ITROBOTICS ITMEDIAPOOLROBOTWARE_5.12.0138" name="RobotWare" version="5.12.0138.00" />

  </UsedMedia>

- <ControlModule>

  <Key>W6sueS-wHMswusswstMstss9</Key>

  <SignatureNr>141</SignatureNr>

  <Category descr="OS">RobotWare OS and English</Category>

  <Category descr="Languages">644-5 Chinese</Category>

  <Category descr="Options">709-x DeviceNet</Category>

  <Category descr="Options">613-1 Collision Detection</Category>

  <Category descr="Languages">645-5 Chinese</Category>

  <Category descr="Suboptions">709-1 Master/Slave Single</Category>

  <Option descr="RW Control module key" />

  <Option descr="RobotWare OS and English" />

- <Option descr="644-5 Chinese">

  <SubOption descr="645-5 Chinese" />

  </Option>

- <Option descr="709-x DeviceNet">

  <SubOption descr="709-1 Master/Slave Single" />

  </Option>

  <Option descr="613-1 Collision Detection" />

  </ControlModule>

- <DriveModule>

  <Name>DriveModule1</Name>

  <Key>4NdpNdJG9ef.ddO</Key>

  <SignatureNr>132</SignatureNr>

  <Category descr="Manipulators">ABB standard manipulator</Category>

  <Category descr="Manipulators">Drive System '04, 140/1400</Category>

  <Category descr="Manipulators">IRB 1410</Category>

  <Category descr="Variants">1410</Category>

  <Category descr="Drives">RC1 No add drive</Category>

  <Option descr="RW Drive module 1 key" />

- <Option descr="ABB standard manipulator">

- <SubOption descr="IRB 1410">

  <SubOption descr="1410" />

  </SubOption>

  </Option>

- <Option descr="Drive System '04, 140/1400">

  <SubOption descr="RC1 No add drive" />

  </Option>

  </DriveModule>

  </SystemProperties>

I can't find pc interface option in this file.Is it mean i could not connect the controller to a pc?