Setup network boot S4c 3.0

ZarooS

hi, i'm trying to conect my IRB 6400 M98, with OS S4C 3.2 to a PC for store programs.
they have in the A71 a Network I/O computer DSQC336 with Ethernet connector.

i try several nfs servers, but it still give me a protocol nfs0 error and can't mount a drive in the robot.

A?have anyone idea of where i can found the Setup network boot S4c 3.0 (3HAB2392-2) disk or other program to connect my robots to a PC?

thanks in advance.

ZarooS

i continue to search and found that ABB upgrade this software to one compatible with Windows XP called "Ethernet Utilities".

A?somebody knows where i can obtain a copy of this software?

0lda

You could found it via Solutions Bank:



Document Title: RobotWare Setup network boot NT

ABB Document Number: 3HAC2699-1/01



http://search.abb.com/library/



http://solutionsbank.abb.com/



I have never tested it. Would be better upload the BW by TPFTd daemon, but i dont't know how to configure FTP daemom or if possible put all the BW files in one directory. RobotWare_Setup_network_boot_NT_2699-1.zip

Gracie

Olda,

Thanks for this wonderful info.  I was looking for this and now I found like winning a trasure..:P You made all the possibilities that I can make use and install this in my PC.  Thanks again!

0lda

s4online utilty BW 3.0 and higher http://library.abb.com/global/scot/scot241.nsf/veritydisplay/c069a90761a40426c12579e30048fa06/$file/s4online_2.0.2_cd_image.exe



only if option RAP Serial Link or FactoryWare Interface



S4Online



about RobotWare Setup network boot NT: will ... only made key.id/media.id ...



-id ABB_BOOTSYS1 -key "-path ""/tftp/s4boot/programs/3hac2700-2/disc.1/abb_boot.sys"" -volume -1"



you need configured bootp daemon on server not dhcp with appropriate MAC address.