RobotStudio event

how to palletizing 2 pallet areas one by one/flow problem [Palletizing Powerpac]

hakim_akatsuki
hakim_akatsuki ✭
edited June 2013 in PowerPacs

First of all,sorry for my bad language,english is not my first language.

Can someone take a look of my project?

I want the robot to arrange the boxes in the first pallet area first, only after after the first pallet is full, the robot needs to fill the second pallet area until it is full and repeat this process again and again.
Right now the robot is filling boxes on both palletizing area simultaneosly,which is not something that I'm looking for.


can someone tell me which part should i correct to make this changes?


thx in advance!

You can download the pack and go file here(I somehow couldnt attach my file here so i uploaded it to mediafire):

http://www.mediafire.com/download/3bpx4n9v8t9dlpr/palletproblem.rspag

 

 

Comments

  • venkatesh.kathavate
    venkatesh.kathavate ✭

    Hello Hakim,

     

    The powerpac PLC smart component functions that way. It responds to requests made by the controller as and when it gets them.

    Please try this : Open the Operator Interface without running simulation (Simulation button drop down) and run the flows individually from the operator interface.

     

    Hope this answers your question.

    Best Regards,
    Venkatesh 

Categories

In this Discussion