The system could not be created

Daniel Poirier

I have trouble creating controller in RS 5.6. I got 2 messages :

"The system could not be created"

================Detail=================

RobotStudio .NET exception: SystemBuilder.exe: exitcode = 1
============================================
Base exception: Exception
SystemBuilder.exe: exitcode = 1
   at RobotStudio.Services.RobApi.RobInstall.<>c__DisplayClass23.<RunSystemBuilder>b__22()
   at System.Threading.Tasks.Task.InnerInvoke()
   at System.Threading.Tasks.Task.Execute()
--- End of stack trace from previous location where exception was thrown ---
   at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
   at ABBInternal.Controller.VirtualSystemBuilder.<CreateSystemFromKeyFile>d__0.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
   at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
   at ABBInternal.Controller.CreateSystemFromTemplate.<ApplyAsync>d__0.MoveNext()
=======================================================================================

And

Unknown errorr : IRB 360 6Kg 1.6m

====================Detail===========================================

RobotStudio .NET exception: SystemBuilder.exe: exitcode = 1
============================================
Base exception: Exception
SystemBuilder.exe: exitcode = 1
   at RobotStudio.Services.RobApi.RobInstall.<>c__DisplayClass23.<RunSystemBuilder>b__22()
   at System.Threading.Tasks.Task.InnerInvoke()
   at System.Threading.Tasks.Task.Execute()
--- End of stack trace from previous location where exception was thrown ---
   at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
   at ABBInternal.Controller.VirtualSystemBuilder.<CreateSystemFromKeyFile>d__0.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
   at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
   at ABBInternal.StationManagement.SystemGallerySupport.<StartSystem>d__1.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
   at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
   at ABB.Robotics.RobotStudio.Environment.CommandBarButton.<RaiseExecuteCommand>d__0.MoveNext()
=======================================================

 

Any help will be appreciated.

 

Thanks

 

Daniel Poirier

I resolve my issue by doing a repair on the Robot Studio installation AND Robotware installation.

Andraz23

How did you do that? I always get an error when I wanna setup a new station saying:

RobotStudio .NET exception: Product installation is failed for new system creation Internal Error
============================================
Base exception: ProductInstallationFailedException
Product installation is failed for new system creation Internal Error
   at ABB.Robotics.RIM.RobInstallManager.CreateVirtualController(ControllerSystem cSys, String controllerLocation, String productsInstallationParentPath)
   at System.Threading.Tasks.Task`1.InnerInvoke()
   at System.Threading.Tasks.Task.Execute()
--- End of stack trace from previous location where exception was thrown ---
   at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter`1.GetResult()
   at RobotStudio.Services.Systems.SystemBuilder.SystemBuilderGandalf.<CreateSystemAsync>d__7.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
   at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
   at RobotStudio.Services.Systems.SystemBuilder.SystemBuilderGandalf.<CreateSystemFromTemplateAsync>d__0.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
   at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
   at RobotStudio.UI.Controller.DefineSystemCtrl.<CreateSystemFromTemplate>d__12.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
   at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
   at RobotStudio.UI.Controller.DefineSystemCtrl.<CreateSystemAsync>d__0.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
   at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
   at ABBInternal.Controller.SystemFromLayout.CreateSystemCtrl.<ApplyAsync>d__4.MoveNext()


So far I tried to:

 - Reinstall Robotstudio
 - Open RS with windows 7 compatibiliti mode