Forum Migration Notice
Update (2026-01-21): The user forums are now in read-only mode pending the data migration.

Update (2026-01-12): The user forums will be put into read-only mode on the 21st of January, 00:00 CET, to prepare for the data migration.

We're transitioning to a more modern community platform by beginning of next year. Learn about the upcoming changes and what to expect.

S4 robots on RobotStudio 5.14.03 ?

Luxrobotic
Luxrobotic ✭✭
in RobotStudio

Dear all,

I'd like to know, if it would be possible to create a station with old S4 robots on RobotStudio 5.14.03?

Thanks for answering,





Luxrobotic2012-07-17 11:40:56
Regards

Cornet Raymond
Manager
+352 621 354 570
raymond.cornet@luxrobotic.com
http://www.luxrobotic.com

HP ZBook Fury 16 G11

Comments

  • Anders S
    Anders S mod


    Hi,
    You can only use IRC5 systems (Virtual Controllers) in RobotStudio 5.xx.
    But I know that some people who has S4 robots use RobotStudio 5.xx anyway. If the robot model you should use also have been sold with IRC5 controller (e.g. IRB4400), you can setup an IRC5 system for your robot. The RAPID language is the same in S4 and IRC5 (except for some process instructions that have been changed in IRC5), so if you convert the I/O-file (EIO.cfg) to IRC5, you can use RobotStudio 5.xx to program your S4 robot, but only if the robot model exist in RobotStudio 5.xx.
    Best regards,
    Anders Spaak
    ABB Robotics
  • Luxrobotic
    Luxrobotic ✭✭
    Hello,

    thank you for your reply,

    I'll try when I will have some avaibility.





    Regards

    Cornet Raymond
    Manager
    +352 621 354 570
    raymond.cornet@luxrobotic.com
    http://www.luxrobotic.com

    HP ZBook Fury 16 G11

Categories

In this Discussion