Difference in Simulation speed between 2 robots
c63amg
✭
in RobotStudio
Hello,
I am simulating a multi robot cell, and the robots are simulating at different speeds. They are programed at the same speed.
I have already confirmed the controllers for each are reading 100%.
The simulation is set at 100% in the simulation settings.
Where else can I control simulation speeds?
I am simulating a multi robot cell, and the robots are simulating at different speeds. They are programed at the same speed.
I have already confirmed the controllers for each are reading 100%.
The simulation is set at 100% in the simulation settings.
Where else can I control simulation speeds?
0
Comments
-
how big is the difference and which robots are you using?0
-
Are the robots of the same specs? In other words, the same type of robot with the same reach?Best regards
Alexander Källberg0 -
Are the two robot using the same load data and tool data ?Regards
Knud Erik Lindberg
Jorgensen Engineering0 -
Any velsets or accsets in programs? Also, any arm load?Lee Justice0
Categories
- All Categories
- 5.4K RobotStudio
- 384 UpFeed
- 15 Tutorials
- 12 RobotApps
- 290 PowerPacs
- 405 RobotStudio S4
- 1.8K Developer Tools
- 241 ScreenMaker
- 2.7K Robot Controller
- 283 IRC5
- 44 OmniCore
- 6 RCS (Realistic Controller Simulation)
- 3 RobotStudio AR Viewer
- 746 RAPID Programming
- 15 Wizard Easy Programming
- 110 Collaborative Robots
- 3 Job listings