Integrated camera Cognex AE3
Hi everyone!
I´m working right now with YuMi for a project in the university. This robot includes the camera Cognex AE3 in the right hand, but I cannot find any information about obtaining images from it and how to activate the camera. I´ve tried to obtain the images from RobotStudio and from the FlexPendant, but there is no response. Does anyone know how to configure the camera and how could I use it? I haven´t found any info about it in the forum.
Thanks in advance.
I´m working right now with YuMi for a project in the university. This robot includes the camera Cognex AE3 in the right hand, but I cannot find any information about obtaining images from it and how to activate the camera. I´ve tried to obtain the images from RobotStudio and from the FlexPendant, but there is no response. Does anyone know how to configure the camera and how could I use it? I haven´t found any info about it in the forum.
Thanks in advance.
Tagged:
0
Comments
-
Hello, the best thing to do right now is to go through the Integrated vision Application manual section 2.2. I have attached the manual here. You can also switch off the firewall and try again. Hope this helps.0
Categories
- All Categories
- 5.5K RobotStudio
- 391 UpFeed
- 18 Tutorials
- 13 RobotApps
- 297 PowerPacs
- 405 RobotStudio S4
- 1.8K Developer Tools
- 249 ScreenMaker
- 2.7K Robot Controller
- 305 IRC5
- 59 OmniCore
- 7 RCS (Realistic Controller Simulation)
- 3 RobotStudio AR Viewer
- 773 RAPID Programming
- 17 Wizard Easy Programming
- 105 Collaborative Robots
- 4 Job listings