Integrated camera Cognex AE3
Hi everyone!
I´m working right now with YuMi for a project in the university. This robot includes the camera Cognex AE3 in the right hand, but I cannot find any information about obtaining images from it and how to activate the camera. I´ve tried to obtain the images from RobotStudio and from the FlexPendant, but there is no response. Does anyone know how to configure the camera and how could I use it? I haven´t found any info about it in the forum.
Thanks in advance.
I´m working right now with YuMi for a project in the university. This robot includes the camera Cognex AE3 in the right hand, but I cannot find any information about obtaining images from it and how to activate the camera. I´ve tried to obtain the images from RobotStudio and from the FlexPendant, but there is no response. Does anyone know how to configure the camera and how could I use it? I haven´t found any info about it in the forum.
Thanks in advance.
Tagged:
0
Comments
-
Hello, the best thing to do right now is to go through the Integrated vision Application manual section 2.2. I have attached the manual here. You can also switch off the firewall and try again. Hope this helps.0
Categories
- All Categories
- 5.6K RobotStudio
- 398 UpFeed
- 20 Tutorials
- 14 RobotApps
- 300 PowerPacs
- 406 RobotStudio S4
- 1.8K Developer Tools
- 250 ScreenMaker
- 2.8K Robot Controller
- 336 IRC5
- 67 OmniCore
- 8 RCS (Realistic Controller Simulation)
- 828 RAPID Programming
- 12 AppStudio
- 4 RobotStudio AR Viewer
- 19 Wizard Easy Programming
- 107 Collaborative Robots
- 5 Job listings