PC SDK delete IO signal from configuration
Options
Hi,
I have looked through the PC SDK reference manual, and can only find the posibility to Reset the entire EIO domain, or load a new configuration with the options of Add, Replace og ResetAndAdd. I would like to leave all the EIO configurations as they are, and only delete a specific IO signal.
I have looked through the PC SDK reference manual, and can only find the posibility to Reset the entire EIO domain, or load a new configuration with the options of Add, Replace og ResetAndAdd. I would like to leave all the EIO configurations as they are, and only delete a specific IO signal.
I could of course save the EIO domain,
parse the configuration file, delete the specific IO from the
configuration file and write it back with ResetAndAdd. But it is seems a
bit overkill.
Thanks in advance, best regards
Henrik Slotholt0
Answers
-
hslotholt said:Hi,
I have looked through the PC SDK reference manual, and can only find the posibility to Reset the entire EIO domain, or load a new configuration with the options of Add, Replace og ResetAndAdd. I would like to leave all the EIO configurations as they are, and only delete a specific IO signal.I could of course save the EIO domain, parse the configuration file, delete the specific IO from the configuration file and write it back with ResetAndAdd. But it is seems a bit overkill.Thanks in advance, best regardsHenrik Slotholt0
Categories
- All Categories
- 5.4K RobotStudio
- 383 UpFeed
- 14 Tutorials
- 12 RobotApps
- 291 PowerPacs
- 405 RobotStudio S4
- 1.8K Developer Tools
- 247 ScreenMaker
- 2.7K Robot Controller
- 279 IRC5
- 46 OmniCore
- 6 RCS (Realistic Controller Simulation)
- 3 RobotStudio AR Viewer
- 733 RAPID Programming
- 15 Wizard Easy Programming
- 105 Collaborative Robots
- 3 Job listings